PC Engines Home
  ALIXAPUAPU2CompactFlash AdaptersTest ToolsAtticInfoShopSupport
box2c Indoor enclosure for wrap.2* / alix.3*
Status active
Part numbers box2c = 1 LAN enclosure, RoHS compliant
Use with wrap2e1
wrap2e3
alix3* series
brk3c1 bracket for alix3c1 / no opening
brk3c2 bracket for alix3c2 / with USB opening
brk3c3 bracket for alix3c3 / with USB and VGA / audio openings
pigsma (SMA reverse pigtail)
antsma (SMA reverse antenna)
pigsmaf (SMA female pigtail)
Spec Aluminum Enclosure designed for WRAP.2* / ALIX.3* boards. Cutouts for 1 LAN, DC jack, 2 SMA, DB9, 3 LEDs in back.
Dimensions 113 x 163 x 30 mm
Includes Aluminum extrusion, 1.5mm Al back plate, 4 screws, rubber feet, rubber plugs for unused SMA holes. Antenna / pigtails / WRAP board shown are not included ! Please order front bracket (brk3c1 / brk3c2 / brk3c3) separately.
Assembly notes Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts from DB9 connector of WRAP board. Mount back plate to WRAP board, replace hex nuts. Slide WRAP board into the enclosure, fasten the back plate using 4 screws. Tip for reinserting self-cutting and plastic screws: To find the start of the existing thread, turn screw counterclockwise first until you feel the start.
Customization Customer silk screen, paint / anodizing, cutouts etc. are possible for volume orders.
Customs note Customers in the US beware - this product is based on aluminium extrusions made in China, which are subject to very high (400+%) countervailing duties in the US ! Alloy used: 6063-T5, extruded by Shenzhen Hongan Aluminium Products Ltd. according to our supplier.
Manufacturer PC Engines / MVAS
Origin China

© 2002-2016 PC Engines GmbH. All rights reserved.