PC Engines Home
  ALIXAPUCompactFlash AdaptersTest ToolsAtticInfoShopSupport
wle200nx 802.11 a/b/g/n miniPCI express radio
Status active
Part numbers wle200nx = Compex WLE200NX a/b/g/n miniPCI express radio card, I-Pex connectors
Use with apu1d or apu1d4 system board
pigsma pigtail (recommend two)
antsma 2.4 GHz antenna or antsmadb dual band antenna (recommend two)
Data sheet Compex WLE200NX
Chipset Qualcomm Atheros AR9280.
Connector I-Pex / u.fl
Note Wireless radio cards are ESD sensitive, especially the RF switch and the power amplifier. To avoid damage by electrostatic discharge, the following installation procedure is recommended:
• Touch your hands and the bag containing the radio card to a ground point on the router board (for example one of the mounting holes). This will equalize the potential of radio card and router board.
• Install the radio card in the miniPCI express socket.
• Install the pigtail cable in the cutout of the enclosure. This will ground the pigtail to the enclosure.
• Touch the I-PEX connector of the pigtail to the mounting hole (discharge), then plug onto the radio card.
• Use external lightning protection for outdoor applications.
Compliance FCC & CE. Intended for professional use.
Warranty 1 year.
Manufacturer Compex
Origin China
© 2002-2014 PC Engines GmbH. All rights reserved.