PC Engines Home
 About | APU2 | Flash | Tools | Shop | Support
alix3c3 System board
Status EOL, superseded by alix3d3.
Part numbers alix3c3 = 1 LAN / 2 miniPCI / LX800 / 256 MB / USB / VGA / audio - designed for thin clients or networked audio players.
Use with box2c indoor enclosure
brk3c3 bracket for box2c
Spec
  • CPU: 500 MHz AMD Geode LX800
  • DRAM: 256 MB DDR DRAM
  • Storage: CompactFlash socket
  • Power: DC jack or passive POE, min. 7V to max. 20V
  • Three LEDs
  • Expansion: 2 miniPCI slots, LPC bus
  • Connectivity: 1 Ethernet channel (Via VT6105M 10/100)
  • I/O: DB9 serial port, dual USB, VGA, audio headphone out / microphone in
  • RTC battery
  • Board size: 100 x 160 mm
  • Firmware: Award BIOS
Customer options I2C bus, buzzer
BIOS updates Please see alix3d3 page.
CMOS reset alix3c3 does not have a CMOS reset jumper. If the board does not start due to bad setup options, please follow this procedure:

To clear the CMOS RAM, first disconnect power. Then short the battery supply from resistor R20 (far end, away from the battery) to GND (for example on a mounting hole). The probes of a multimeter set to 200 mA mode are a good way to make the contact, and penetrate flux residues etc.

Manufacturer PC Engines
Origin Taiwan
Schematic PDF
photo
photo
© 2002-2021 PC Engines GmbH. All rights reserved .