About | APU2 | Flash | Tools | Shop | Support |
case2c1 | outdoor enclosure for wrap.2* / alix3* |
---|---|
Status | discontinued, still available at mini-box. |
Part numbers |
case2c = 2 antenna, 1 Ethernet outdoor enclosure
(antenna holes on top, Ethernet hole at the bottom)
case2c1 = 1 antenna, 1 Ethernet outdoor enclosure (all holes at the bottom end) case2c2 = 2 antenna, 1 Ethernet outdoor enclosure (all holes at the bottom end) case2c4 = 4 antenna, 2 Ethernet outdoor enclosure (two antenna holes on top, two antenna + 2 Ethernet holes at the bottom) |
Use with |
alix3d2
(wall mount bracket) pignf (pigtail N female) pignf6 (enhanced pigtail N female) antnm (antenna N male) pignr (pigtail N reverse) antnr (antenna N reverse) |
Spec | IP-67 outdoor enclosure designed for WRAP.2* / ALIX.3* boards. Die-cast aluminum. |
Includes | Case + cover + seal, board standoffs + screws, pole mount bracket + screws, IP-67 Ethernet jack assembly (2 for case2c4), IP-67 Ethernet plug assembly (to crimp to your cable, 2 for case2c4). |
Compliance | RoHS compliant. |
Manufacturer | mini-box. |
Origin | China |
© 2002-2021 PC Engines GmbH. All rights reserved . |