About | APU2 | Flash | Tools | Shop | Support |
case1c1 | Enclosure 2 LAN |
---|---|
Status | EOL, can still be manufactured on a special order basis (MOQ 2K units). |
Part numbers |
case1c1 = 2 LAN, 2 antenna,
plain anodized
case1c1red = 2 LAN, 2 antenna, red anodized or painted case1c1blk = 2 LAN, 2 antenna, black anodized or painted case1c1u = 2 LAN, 1 antenna, USB, plain anodized case1c1blku = 2 LAN, 1 antenna, USB, black anodized or painted case1c2 = 3 LAN, 1 antenna, plain anodized case1c2red = 3 LAN, 1 antenna, red anodized or painted case1c2blk = 3 LAN, 1 antenna, black anodized or painted case1c2u = 3 LAN, USB, NO antenna, plain anodized case1c2redu = 3 LAN, USB, NO antenna, red anodized or painted case1c2blku = 3 LAN, USB, NO antenna, black anodized or painted |
Use with |
wrap1e103 (2 LAN) /
wrap1e203 (3 LAN) /
alix2 and alix6 series boards (2 LAN / 3 LAN)
pigsma (SMA reverse pigtail) antsma (SMA reverse antenna) pigsmaf (SMA female pigtail) |
Spec | Enclosure designed for WRAP.1* / ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 or 3 LAN, (depending on version) SMA connector, DC jack in back. Enclosure made of anodized aluminum. Some units may be painted. Dimensions 158 mm wide x 155 mm deep x 28 mm high. RoHS compliant. |
Includes | 4 screws to mount system board, 4 screws to close enclosure, 4 self-adhesive feet, 1 or 2 rubber plugs to close unused SMA holes. |
Assembly notes | Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts from DB9 connector of WRAP board. Install CF card. Hold WRAP board with the DB9 connector facing up (so the shell doesn't fall off), then slide the enclosure base over it at a slight angle. Tilt the WRAP board into place and insert all screws and hex nuts. Tip for replacing self-cutting and plastic screws: To find the start of the existing thread, turn screw counterclockwise first until you feel the start. |
Customization | Customer silk screen, custom paint colors etc. are possible for volume orders. |
Manufacturer | PC Engines |
Origin | China |
© 2002-2021 PC Engines GmbH. All rights reserved . |